Mr Scrap 001 The first model only ran several times and the roller bearing failed. No video was made. Note: Original Head
Mr Scrap 002 Notices of how quickly Mr Scrap jumps to life once the control valve is open. This kind of engine performance, is welcoming. A vehicle engine could be stopped waiting for green lights rather than idling and using fuel while waiting. Click For The Video Mr Scrap 002 Running Video Tip, On the Video Viewer, right bottom corner an arrow which puts it into SKIN MODE, which works best. Posted Sept 24 2005 This video may not work in older versions of Windows, see Contact Information for help
Mr Scrap 003 Several changes have been made to the valving and using this small compressor. A test was made to see how much compressed air was required to keep Mr Scrap 003 running. The small compressor ran constanly, and Mr Scrap 003 ran approximatly 300 to 400 RPM but powerless. It appears the small compressor rated at 2.5 CFM @ 90 PSI. The two balanced out, see short video of Mr Scrap 003 running on air only, no fuel used. Click For The Video Mr Scrap 003 Running on air only Video Tip, On the Video Viewer, right bottom corner an arrow which puts it into SKIN MODE, which works best. Posted Nov 6 2005
A new improved Mr Scrap 004 was born today. See the short video of Mr Scrap running on less than 30 psi of air and un-leaded gasoline. New Mr Scrap running on gasoline and air from the above small compressor Video Tip, On the Video Viewer, right bottom corner an arrow which puts it into SKIN MODE, which works best. Posted Nov 14 2005